LogoTransparent-Black

THE PROJECT OF LINE MEASURE TOOL

IDEA

STAGE 1

STAGE 2

STAGE 3

TECHNICAL DATA

SOFTWARE

CALIBRATION & MEASURE

QUICK QUESTION

FACEBOOK ALBUM

BUY IT

 

 

 

 

 

 

 

Main idea and the task of the project:

  • The tool must provide and work at the smaller workspace, the maximum length for a tandem wing is around 10 meters. So, it can be a precious measure in the workspace of 6 meters if we back one point of measure below and parallel with the original line.
  • The moving car must be movable up to the 1.8 meters. It can be measured most solo gliders with one attach point for risers.
  • Frame is maked with Steel profile 20x20, 608 bearing integrated in the pastic holder, 307 bearing integrated in the moving car, 8mm leading screw, 8mm crank and one 160-200 mm wheel.
  • Hardware must be followed by software on the device and on the PC for analytics, also.

PLANED STAGE OF THE PROJECT

STAGE 1

3DModelStage1

1. Make 3D model of machine with detailed 3D printed parts

Done in the first half of February

2. Make manual Hans moving frame and tested moving platform.

All is done.

3. Make accessories for wheel holders and testing forces and measure in the real condition.

All is done.

STAGE 2 (end of this stage is the first commercial >>manual version<<)

1. Add manual command DC motor for moving car and change weight meter to manual. At the testing, we see that all digital weight meter have a big disadvantage and maybe we will get the wrong information.

FINISHED. We are success test a new car with the manual scale weight. The final phase is to test the access point and prepare the measuring process.

The disadvantage is automatic turn off (and maybe you will not see weight at the right. Final version will be changed to the manual scale weight.

2. Make a second prototype and changed railway. Now, all is on the one railway.

FINISHED. Successful tested and make a second prototype at one railway with the tooth, the instrument is put on the moving car. Now, we can say that is final first commercial version :)

3. Start working on the PC software for administration of work (measured paragliders line)

In the progress. The first thing was that the useful version will be up to the pre-order period. Due to the new railway construction, packing size problem, covid 19  etc. Now, we can say that the useful version it will be ready up to the end of 2020..

SECOND PROTOTYPE, FINAL HARDWARE SOLUTION AND WHAT IS INCLUDED IN THE SOLUTION

Final-LineMeasure
  1. Main railway frame dowels
  2. Main railway frame
  3. Main railway extender roller
  4. Main railway frame screw
  5. Main railway rotation screw
  6. Main railway and railway screw connector
  7. Car remote control
  8. Car power and speed control
  9. Car rotation move roller
  10. DC 12V motor
  11. Car frame
  12. Manual scale weight 10kg
  13. Laser distance meter
  14. The leg railway
  15. The reflector with screw
  16. Manual meter railway holder
  17. Small line attach point
  18. Railway stative
  19. The leg rotation screw
  20. The leg stative screw
  21. The leg
  22. The leg extender
  23. Wall wheel
  24. The wheel screw
  25. The wheel water level and manual meter holder
  26. The wheel reflector
  27. Separated line connector
  28. The wall frame screw
  29. The wall wheel holder
  30. The wall dowels

HARDWARE CHANGES (during prototyping)

  1. Adding DC motor on the prototype is Fiat Uno front glass cleaner. At final probably it will be industry or some similarly car front glass cleaner..
  2. Add speed control on the DC motor.
  3. Changed car digital weight to manual scale weight.
  4. Changed orientation of measure device, now it is parallel with leading screw.
  5. Changed legs of rail way.
  6. Now ball bearing on a rail is in the enclosed case.
  7. Now it is added holder for measure separated and smaller line up to the 1.8 meters.
  8. Added more more btw. 6screw to the wall mount system,
  9. Added measure holder and reflector on the main and wheel frame.
  10. Added unuse line and risers holder.
  11. Add and integrated metal plates into the Max Bearing holder.
  12. Added options for measure the small separated lines.
  13. Changed the raiway system to the one with tooth.
  14. Changed instrument and power system to the one compact car with all instruments on the one frame.
  15. Re-design the railway and cut it on the two parts. For future transport with post-office. Now, The main part is split into two parts: The main railway and the leg railway.
  16. Adding reflector at the Leg railway, The leg extender (up to the 6cm for leveling of the railway).
  17. Adding the extender roller and extender belt (for connecting the risers on the main railway frame).
  18. Change leveling sensor at the wall frame. Now, the manual meters are closer to the line path.

PRE-ORDERED SHIPMENT IN THE COVID 19 CONDITION.

   Now, We wish to say big thanks for all purchase of our last product. Also, now we can say that most hardware solutions are shipment to the customer from the pre-order period, and only one wait for the destination country be re-opened.

 

 

STAGE 3 (end of that stage is the second commercial version >>full-automatic and digital version<<)

1. Make a final choice for semi-automatic equipment. And make a final choice (PLC or Arduino automation)?

 

2. Order equipment and make 3D model of upgrade kit :)

 

3. Start programming the machine.
By plan is to get automatic moving car up to the 5kg and manual read distance and input information on the machine, prepare data to send

 

Right now, We are pretty sure that it is with today's technology possible to make this machine fully automatic and fully digital.

But we will see is it really need for this world :)

TECHNICAL DATA - 1st MANUAL VERSION

Power supply:

220V 50Hz

Work power supply:

12V 1A

Electronic:

DC motor 12V.
Function: Left & Right movalable with speed control and push botton for start and stop moving car

Work area with one fix lenght:

1700 mm

Wheel size:

Industry wheel 160 -180 mm,

Time for the movable car on the maximum speed:

4 seconds

Weight meter:

Manual scale up to the 10kg.

Main top movalable lenght meter:

Laser class II

Fix bottom lenght meter:

Manual meters

Measure accurence:

Maximum 1.5 mm. Most mistake can be on the optical measure read.

Optimal lenght of workspace:

6 to 12 meters. For smaller workspace, you must measure separated lines and calculate the total length of lines.

Software

Ours PC software for analitics collect and archive meassured information. Permanent licence is included.

 

 

 

 

 

 

SOFTWARE

   NOTE: Now we can only say that a useful version will be ready up 31.12. (The end day of the commercial sale). And that is written in the MicrosoftVisualFoxPro.

CALIBRATION AND MEASURE SYSTEM

  Car laser calibration (CLC) have two position at railway (front and back). Both position will be measured manual from the one side to middle of the wheel as second side. This option will calculated one time and just before start a first measur it is divergence between  measured by hand and mesured by laser distance meter.

   Manual line point (MLP) is one time manual measured lenght from middle of the wheel up to the connection on the risers. This will be measured one time and just before start of measure.

SYSTEM CALCULATION VALUES AND DESCRIPTION
IN THE MEASURE SOFTWARE

Value

Short name

Type

Description

Car laser calibration

CLC

Temperary

   Laser distance meter precision depends on many conditions like relative humanity, area temperature, measured distance, light in the area ...
   So, this value is a divergence from a real distance and measured the distance from the laser distance meter device. (Distance from the middle of the wheel to the measured point on the rail).

Laser start point

LSP

Permanent

   Is value from scale weight to the laser meter start point.

Half Diameter lenght

HDL

Permanent

   Calculation of lenght of half wheel (path of the line on the wheel).
   ((157.5 x3.1416) /2) = 247.40

Manual Line point

MLP

Temperary

   This is value from middle of wheel to the start of line on the riser side.

Lost lenght

LST

Permanent

   The wheel will have a small loss of load on the car and risers side :( That is around 120 grams of the load. During testing, we are finding that is average lost 0.3 mm depending on the type and diameters of lines.

Fixed calibration correction

FCC

Permanent

   This value is fixed and can be different for every machine what we will make

Readed laser distance

RLD

Temperary

   Middle readed value from laser distance meter

Car hook diameter

CHD

Permanent

   This value is diameter of hook and final result is multipliter with 0.7854 (1/4 of full diameter lenght)

End hook diameter

EHD

Permanent

   This value is diameter of hook and final result is multipliter with 0.7854 (1/4 of full diameter lenght)

Measured Line Lenght

MLL

Temperary

   Everything is in the name of the value.

MLL = FCC + CLC + (RLD - LSP) + (CHD x 0.7854) + HDL + MLP - LST + (EHD x 0.7854)

Note: This is not a final calculation We are working on the best method.

BUY IT

PRE-ORDER PRICE

PRE-ORDERED SHIPMENT

 

 

 

 

Way of delivery:
NOTE:
FOR DELIVERY VIA DHL SERVICES PLEASE WRITE US AT E-MAIL

PRE-ORDER PRICE

   Pre-order period officially starts 08.06.2020 and will last till 30.06.2020. Pre-order prices are listed in the table below, and they depend on the time of purchase. After the promotional period ends regular price of product will be 900 EUR.

 

PRE-ORDER TIME PERIOD

PRODUCT PRICE

08.06.2020 - 14.06.2020

600 euro

15.06.2020 - 21.06.2020

700 euro

22.06.2020 - 30.06.2020

800 euro

REGULAR PRICE

900 euro

PRE-ORDER PRODUCTION AND SHIPPING CONDITION

   Pre-order production is limited. All production and shipment during the Pre-order period will be made from 01.07. up to 10.07. Shipment is carried out by traditional courier services - due to COVID 19 issue delivery time may take slightly longer than usual.

   Also, there is an option for direct and full size shipment to Hungary, Austria, Germany, Holland, and Belgium along the following highways: Hungary M5, Austria S1, Germany A3 and A8.

   All shipping will be provided with tracking-code.

   For countries that allow package value and in the case of loss in the transit, we will refund 70% of your payment. Or we will make you one more and resend it, but with charge only the postoffice fee.

   The list of country that allows package value is: Argentina, Australia, Austria, Bahami, Belgium, BeloRussia, Bosnia and Hercegovina, Brasil, Bulgaria, Burkin Faso, Burinda, Vatikan, Gabon, Gana, Gvinea, Grenland, Gruzia, Greece, Denmark, Egypt, Estonia, Zambia, India, Iran, Island, Italy, Japan, Jermeny, South Corea, Kzakhstan, China, Cyprus, Kyrgyzstan, Komori, Kuwait, Cook Island, Letonia, Lithuania, Liechtenstein, Hungary, Malesya, Maly, Marianian Islands, Marocco, Marshall Islands, Mauritius, Micronezia, Moldavia, Monaco, Germany, Nigeria, New Caledonia, New Zeland, Pakistan, Palau, Poland, Puerto Rico, Portugal, Romenia, Russia, USA, San Marino, Saudian Arabic, Saint Tome, North Macedonia, Senegal, Singapore, Syrua, Slovakia, Slovenia, Taikistan, Tunis, Turkmenistan, Turkey, Uzbekistan, United Arabian Emirates, Ukraina, Finland, France, France Polynesia, Hollandia, Hong Kong, Croatia, Montenegro, Chad, Czech Republic, Switzerland, Sweden and Spain.

   For all country who don`t allow package value and package is back to us. We will organize resending only with postoffice cost.

    We don`t sending product to the next country: Somalia and Holland Antily

IMPORTANT NOTE: Before submitting your payment please contact us for more details related to terms of delivery and included fees.

AT COVID 19 PERIOD SOME SHIPMENT MAYBE NOT WORKING. THE LIST OF AVAILABLE SHIPMENT FROM SERBIAN POST-OFFICE. The list is from 19.08.2020.

   Albania, Argentina, Australia, Belgium, BeloRussia, Bosnia and Hercegovina, Brasil, Bulgaria, Montenegro, Czech Republic,Denmark,  Gruzia, Egypt, Estonia,  Finland, France, Liechtenstein, Luxembourg, Hungary, Marocco, Malta, Malesya, China, Germany, Norwegian, Poland, Portugal, Romenia, Russia, United States of America, Grece, Holland, Hong Kong, Croatia, India,Ireland, Island, Italy, Izrael, Japan, Jermenia, South Corea,  South Africa, Canada, Kazakhstan, Kenya, Ciprus, Latvia, Liban, San Marino, Saudi Arabia, Senegal, Macedonia, Singapore, Slovakia, Slovenia, Spain, Switzerland, Swden, Thailand, Turkey, United Arab Emirates,  Ukraina, Urugvay, Vatican, Great Britany, Vietnam.

but before you buy please contact us to check one more time.

 

 

QUICK EMAIL QUESTION OR SUGGESTION ABOUT THE PROJECT:

 

 

Add to the newsletters:

 

 

 

20Main_XYZWorldWide

20Main_AboutBusiness

This link is with secure SSL certificateAbout XYZParaGear.com (2017-2019)

This link is with secure SSL certificateProduction procedure

This link is with secure SSL certificateXYZParaGear na srpsko-hrvatskom

This link is with secure SSL certificateAddition information

 

This link is with secure SSL certificatePrice policy

 

This link is with secure SSL certificateChange or cancel order

 

This link is with secure SSL certificateProduction and Shipment time

 

This link is with secure SSL certificateDelivery time

 

20Main_ProductionNote

 

This link is with secure SSL certificateProduct safety notice

 

This link is with secure SSL certificateProduct size table

 

This link is with secure SSL certificateProduct installation procedure

The XYZParaGear website does not make any use of cookie for profiling people.
There is no advertising on this website, no banners...
Only cookie what can be from this site is from outside script like analytics.google.com, facebook.com or paypal.com